Overband magnet Block magnet Magnetic platemütek
Hawk-Eye
Overband magnet Block magnet Magnetic plate
mütek
Hawk-Eye
Vaste prijs excl. btw
€ 990
Bouwjaar
2026
Toestand
Nieuw
Locatie
Neckartailfingen 

Basisgegevens
- Machinetype:
- Overband magnet Block magnet Magnetic plate
- Producent:
- mütek
- Model:
- Hawk-Eye
- Bouwjaar:
- 2026
- Toestand:
- nieuw
Prijs & locatie
Vaste prijs excl. btw
€ 990
- Locatie:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

Bellen
Details over het aanbod
- Advertentie-ID:
- A161-58931
- Laatste aanpassing:
- voor het laatst op 25.09.2026
Omschrijving
Extremely powerful industrial magnet for iron separation
Bwjdpotqfhxefx Aktow
Special price: €990 net (shipping €14.90 net)
*Construction lengths can be found in image 2
The active side is equipped with a stainless steel end plate (material 1.4301).
Threaded holes are provided on the rear side for mounting; *handle available on request
The block magnet systems can be used at temperatures of up to max. +100°C operating temperature.
The magnet surface should be cleaned regularly from captured iron parts.
Pickup distances for all types, for example:
For a steel nut M5: approx. 60 mm
For an M5 x 30 screw: approx. 100 mm
Mounting example 1:
Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.'
Mounting example 2:
Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible.
Assembly and safety instructions:
When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby.
The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Bwjdpotqfhxefx Aktow
Special price: €990 net (shipping €14.90 net)
*Construction lengths can be found in image 2
The active side is equipped with a stainless steel end plate (material 1.4301).
Threaded holes are provided on the rear side for mounting; *handle available on request
The block magnet systems can be used at temperatures of up to max. +100°C operating temperature.
The magnet surface should be cleaned regularly from captured iron parts.
Pickup distances for all types, for example:
For a steel nut M5: approx. 60 mm
For an M5 x 30 screw: approx. 100 mm
Mounting example 1:
Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.'
Mounting example 2:
Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible.
Assembly and safety instructions:
When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby.
The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanvraag sturen
Telefoon & Fax
+49 711 5... weergeven
Misschien bent u ook geïnteresseerd in deze advertenties.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Neckartailfingen
405 km
Neodymium overbandmagneet, metaalseparator
mütekHAWK-EYE
mütekHAWK-EYE
Geslaagd:
Uw bericht is verzonden.
Advertentie
Neckartailfingen
405 km
Pijpmagneet, metaalafscheider, magneet
mütek SystemtechnikHawk-Eye
mütek SystemtechnikHawk-Eye
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden




















