WEINIG UNIMAT 218 6-head moulder

WEINIG Unimat 218

Used, in good condition
Year of construction: August 2015 (installed end of 2016)

Technical description
Working width (with tool cutting circle 125 mm): 20 - 230 mm
Working height (with mould cutting circle 125 mm): 8 - 120 mm
Six standard feed pendulums from above
Two driven rollers in the machine table

1st spindle
First lower horizontal spindle
Motor with brake 5.5 kW (7.5 HP)
Diameter 40 mm
Speed 6000 rpm
Tool cutting circle 125 - 145 mm
Folding device, incl. folding cutter

2nd spindle
First right vertical spindle 5.5 KW (7.5 HP)
Individual motor with brake
Diameter: 40 mm
Speed: 6000 rpm
Tool cutting circle 40 mm below table level: 100 - 200 mm
Tool cutting circle 55 mm below table level: 100 - 180 mm
Max. Tool diameter behind stop plane 180 mm
Maximum moulding depth 35 mm
Axial adjustment movement 55 mm

3rd spindle
First left vertical spindle
Individual motor with brake 7.5 KW (10 HP)
Diameter 40 mm
Speed 6000 rpm
Tool cutting circle 40 mm below table level 100 - 200 mm
Tool cutting circle 55 mm below table level 100 - 180 mm
Maximum moulding depth 35 mm
Axial adjustment movement 55 mm

4th spindle
First upper horizontal spindle
Motor with brake 7.5 KW (10 HP)
Diameter 40 mm
Speed 6000 rpm
Tool cutting circle 112 - 200 mm
Max. tool cutting circle for straight cutterheads: 180 mm
Maximum moulding depth 35 mm
Axial adjustment movement 40 mm
Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded.

5th spindle
Second upper horizontal spindle
Motor with brake 7.5 KW (10 HP)
Diameter 40 mm
Speed 6000 rpm
Tool cutting circle 112 - 200 mm
Max. tool cutting circle for straight cutterheads: 180 mm
Maximum moulding depth 35 mm
Axial adjustment movement 40 mm
Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded.

6th spindle
Second lower horizontal spindle
Motor with brake 7.5 KW (10 HP)
Diameter 40 mm
Speed 6000 rpm
Tool cutting circle 112 - 200 mm
Maximum moulding depth 15 mm
Axial adjustment movement 35 mm
Cjdpfx Aequ Sc Hjmtehd

Spindles in general
All moulder spindles dynamically balanced for high concentricity.

Feed system
Frequency-controlled feed 5 - 30 m/min.
infinitely variable with brake 4 KW (5.5 HP)

Machine stand, tables and stops
Manual lubricant pump for table resin removal

Machine operation
Memory function
For memorising the setting values of profiles. Spindle axes with electronic double displays. Function:
- Saves the setting values of the finished profile under a profile number at the touch of a button
- When the profile number is selected again, the electronic double displays show the setting values
- The displays are synchronised by manually adjusting the spindle
- 99 memory locations
Electric height adjustment of the feed
Centralised position of lubrication points at the front of the machine