Krones Ergomodul Cold Glue Labeler (2020)

Krones Kaltleim / Nassleimetikettierer

Overview

Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section.

Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection.

Technical data

- Manufacturer: Krones
- Model: Ergomodul
- Year of manufacture: 2020
- Table pitch diameter: 1,200 mm
- Rotary plates: 30
- Machine pitch: 125.6 mm
- Main drive: controlled servo motor; Danfoss servo motors, container table
- Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar
- Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm
- Container infeed: worm with servo drive; detects damaged and fallen-over containers
- Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed
- Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply
- Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control
- Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass)
- Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components
- Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A
- Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water
- Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg)

Equipment

- 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable
- 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable
- Stand-alone control cabinet with Krones iPanel operator terminal
- Central lubrication (Lincoln progressive distributor with motor pump)
- Ecopush rejection module
- Handling parts set on trolleys

The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine.

Condition
Bwodpfxozzz N Ho Aktow

Used, still installed and under power in an operating line; on-site inspection possible before purchase.

Availability

Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.