Wissellaadbak oplegger

KRONE 3-Achs-Containerchassis 20'

Excerpt from the furnishings. Full furnishings available upon request.

Chassis
* Double-T longitudinal members welded to cross members, front height: approx. 147 mm (including fifth wheel plate)
* Chassis design 'Compact Rear'
* 2 interchangeable kingpins, 1 position
* Front overhang: approx. 570 mm
* Container beams made of rectangular tubes, approx. 200 x 120 x 8 mm thick, reinforced at the approach slope
* Fixed outer steel rear bumper
* Rear underrun protection device in accordance with EC directive
* Side protection device in accordance with EC directive
* Side protection device approx. 460 mm high
* Fully equipped with Quick-Lock locking devices - locking devices in every possible position - locking devices are theft-proof
* Container locking devices for the following containers: 1 x 20' container flush with the rear
* Length from kingpin to rear edge of the vehicle: approx. 6,620 mm

Supporting Device
* Two mechanical landing gear 2 x 12 t, semi-circular with base plate, landing gear operated from one side, right-hand side in FR

Axles/Axle Assembly
* Axles with a load capacity of 9,000 kg each. Wheelbase: approx. 1,410 / 1,310 mm with centering.
Nolhccqjwcu S Tjtsla
* KRONE axles with air suspension and disc brakes, offset 120. Axle spacing = approx. 4,625 mm.
* Brake disc with a diameter of approx. 430 mm.
* Warranty extension? on the KRONE axle: 6 years with unlimited mileage for on-road use within the EU. A 3-year design and manufacturer's warranty is provided on all wear-prone components, excluding natural wear and tear. EU 2014, Norway, Switzerland, Turkey
* Fully automatic electronic lifting axle control for the 1st axle, depending on the load
* Manual function on the control console for forced lifting (= traction aid according to Directive 97/27/EC) and forced lowering via rotary switch
* Preparation of the lifting/trailing axle(s) for operation from the towing vehicle (without towing vehicle installation), according to the selected light connector(s), for control via contact 6 of the 7-pin additional connector - ISO 3731 and/or contact 12 of the 15-pin connector - ISO 12098 and/or ?Contact 8 A of the VBG connector
* With lifting and lowering device, including automatic ride height adjustment

Tires (rims)
* 6-piece, 385/65 R 22.5 without spare wheel
* Tread: M+S (mud + snow)
* Wheel nuts with protective caps
* Spare wheel holder without spare wheel bracket

Fenders
* Plastic wheel cover, splash guard according to EC Directive

Brakes
* Braking system according to ECE Regulation 13 (including vehicle stability function)
* Spring-loaded parking brake, diagnostics via ISO 7638 connector (EBS supply cable)
* Brake line connections below the top edge of the carrier
* 4 wheel chocks with holder, wheel chock(s) secured with a chain
* Standard air connections ISO 1728 (Palm)
* Brake system manufacturer: Wabco
* Caution: The trailer may only be towed by towing vehicles that Ensure the effectiveness of the ABS!
* Acoustic reversing alarm (activated via reversing light)
* EBS system, 2S/2M, 2 sensors on one axle

Lights
* Lighting and light signaling device according to UN ECE Regulation No. 482
* Clearance lights with rubber arm, LED version
* Electrical connections below the upper edge of the beam
* Side marker lights in LED version, 24 volts
* 15-pin socket DIN ISO 12098 at the front, additional 2 x 7-pin sockets DIN ISO 1185 and 3731 at the front. Plug contacts (2 x 7-pin and/or 15-pin) according to ISO 1185/3731 and ISO 12098 with 9 contacts (sta

De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.